Space Hardware Marketplace

2368 flight-proven satellite platforms, components and ground equipment from verified manufacturers worldwide.

2368 products
OBC & Avionics

Protoboard Module Kit

Pumpkin, Inc.
  • SKU711-00303
  • ClassificationPrototyping Hardware
  • Prototyping grid0.100 in grid, approximately 500 plated through-holes

A CubeSat Kit prototyping module providing a red multilayer PCB with an 0.100 inch grid of plated through-holes…

OBC & Avionics

Motherboard Module (MBM)

Pumpkin, Inc.
  • Hardware classificationFlight Hardware | Flight Qualified | Space Proven
  • Module height0.600 in (15.24 mm)
  • Bus interfaceCubeSat Kit Bus standard, 104-pin connector

Pumpkin's flagship flight on-board computer carrier module: combined with a Pluggable Processor Module it forms a low-power 8-…

Structures & Mechanisms

CubeSat Kit™ Base Plate Assembly for AntS Antenna

Pumpkin, Inc.
  • Configuration option: Separation SwitchDual
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
  • Mounting fasteners (to Chassis Walls)6x M3 flathead stainless-steel screws

A base-plate assembly variant configured to mount a third-party AntS deployable antenna system, with dual independent separation switches,…

OBC & Avionics

Development Board (DB)

Pumpkin, Inc.
  • SKU710-00297
  • Bus interfaceCubeSat Kit Bus standard, 104-pin connector
  • Compatible processor modulesPPM A1, PPM A2, PPM A3, PPM B1, PPM D1, PPM D2, PPM E1

Pumpkin CubeSat Kit module that hosts a Pluggable Processor Module (PPM) to form a low-power 8- or 16-bit…

Structures & Mechanisms

CubeSat Kit™ Pro Chassis Walls

Pumpkin, Inc.
  • Configuration option: Size0.5U, 1U, 1.5U, 2U, 3U
  • Product tierPro (premium variant of CubeSat Kit Chassis Walls)

The premium, higher-specification tier of Pumpkin's flight-proven one-piece sheet-metal CubeSat structural element, offered in 0.5U-3U sizes as Flight…

Structures & Mechanisms

CubeSat Kit™ Payload Adapter Plate

Pumpkin, Inc.
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
  • Mounting fasteners (to Chassis Walls)4x M3 flathead stainless-steel screws
  • Payload mountingM3 bolt square pattern

A bulkhead plate used on the payload end of a CubeSat Kit structure to interface Pumpkin's sheet-metal Chassis…

Structures & Mechanisms

Rod & Spacer Kit

Pumpkin, Inc.
  • Configuration option: Size1U, 1.5U, 2U, 3U
  • Rod thread sizeM3
  • Retaining hardwareM3 nut caps each rod

A set of four threaded M3 rods and coaxial aluminum through-hole spacers used to retain a PC/104-format CubeSat…

Structures & Mechanisms

Remove-Before-Flight (RBF) Bracket Kit

Pumpkin, Inc.
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
  • Compatible Chassis Walls sizes1.5U, 2U, 3U
  • Mounting fasteners2x external M3 screws to Chassis Walls

A precision aluminum bracket used in 1.5U/2U/3U CubeSat Kit structures to support and guide the Remove-Before-Flight pin, power…

Structures & Mechanisms

Mid-plane Standoff Kit

Pumpkin, Inc.
  • Kit contents4 unique precision hard-anodized aluminum pieces + fastening hardware
  • FunctionCouples threaded-rod columns of module stack to Chassis Walls; restrains X/Y motion under vibration
  • Compatible Chassis Walls sizes1U, 1.5U, 2U, 3U (pre-drilled mounting holes); usable in 1U when space permits

A hard-anodized aluminum standoff kit that couples the four threaded-rod columns of a CubeSat electronics module stack to…

Structures & Mechanisms

CubeSat Kit™ Base Plate Assembly

Pumpkin, Inc.
  • Configuration option: TypeSolid-Wall, Skeletonized
  • Configuration option: Separation SwitchSingle (deprecated), Dual
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

A precision aluminum end-plate assembly that forms the Motherboard Module (MBM)/C&DH end of a CubeSat Kit structure, available…

Structures & Mechanisms

CubeSat Kit™ Chassis Walls

Pumpkin, Inc.
  • Configuration option: Size0.5U, 1U, 1.5U, 2U, 3U
  • Configuration option: TypeSolid-Wall, Skeletonized
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

Pumpkin's pioneering one-piece sheet-metal CubeSat structural element, available in 0.5U-3U sizes, that forms the primary chassis of a…

Satellite Platforms

CubeSat Kit for Microchip PIC24 MCUs w/USB OTG

Pumpkin, Inc.
  • MCUMicrochip PIC24FJ256GB210, low-power 16-bit, with USB OTG
  • Processor modulePluggable Socketed Processor Module E (PSPM E) with PIC24FJ256GB210
  • Processor module variantPluggable Processor Module E1 (PPM E1)

Pumpkin's complete CubeSat bus kit built around the Microchip PIC24FJ256GB210 low-power 16-bit MCU with USB On-The-Go support, bundling…

Satellite Platforms

CubeSat Kit for Microchip dsPIC33 DSCs

Pumpkin, Inc.
  • DSCMicrochip dsPIC33FJ256GB210, low-power 16-bit Digital Signal Controller
  • Processor modulePluggable Socketed Processor Module D (PSPM D) with dsPIC33FJ256GP710
  • Processor module variantPluggable Processor Module D2 (PPM D2)

Pumpkin's complete CubeSat bus kit built around the Microchip dsPIC33FJ256GB210 low-power 16-bit Digital Signal Controller, bundling structure, C&DH…

Structures & Mechanisms

CubeSat Kit™ Cover Plate Assembly

Pumpkin, Inc.
  • Configuration option: TypeSolid-Wall, Skeletonized
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
  • Mounting fasteners4x M3 flathead stainless-steel screws

A precision aluminum end-plate assembly that forms the payload end of a CubeSat Kit structure, secured to the…

Questions about how KOSMOLAB SPACE works? Guides & FAQ →