Space Hardware Marketplace

76 flight-proven satellite platforms, components and ground equipment from verified manufacturers worldwide.

76 products Reset
Power Systems

Intelligent Lithium Battery Module (BM2)

Pumpkin, Inc.
  • Cell Type8× 18650-size Li-Ion
  • Configuration Options2S4P (8.4V), 3S2P (12.6V), 4S2P (16.8V)
  • Capacity Options72 Wh / 86 Wh / 100 Wh

Space-grade 8-cell Li-Ion battery module with coulomb-counting SoC, cell balancing, configurable voltage (2S4P/3S2P/4S2P), and 15A max output —…

ADCS & Navigation

GNSS Receiver Module (GPSRM 1) Kit

Pumpkin, Inc.
  • ReceiverNovAtel OEM719-GSN (555-channel)
  • Base Frequency BandGPS L1 (upgradeable to GPS+GLONASS L1+L2)
  • COCOM LimitsRemoved

Space-grade GPS/GNSS receiver module kit with NovAtel OEM719 (555-channel), COCOM limits removed, 20 Hz data rate, and built-in…

SmallSat Platforms

12U SUPERNOVA CubeSat Bus

Pumpkin, Inc.
  • Form Factor12U CubeSat
  • Payload Volume10U
  • Peak Solar Power (BoL)105–110 W

Flight-proven 12U CubeSat bus with 10U payload volume, 105–110W peak solar power, Linux computing, and 1° pointing accuracy.

Structures & Mechanisms

ADACS Payload Walls / 1U Chassis MAI-100/MAI-200 Extension

Pumpkin, Inc.
  • SKU703-00397
  • ClassificationFlight Hardware | Flight Qualified | Space Proven
  • Used withTwo Payload Adapter Plates, one Payload Cover Plate Assembly, MAI-100/200 ADCS, CubeSat Kit 1.5U Chassis Walls, Base Plate Assembly

Flight-qualified CubeSat structural walls that extend a 1U chassis to accommodate a Maryland Aerospace MAI-100/MAI-200 ADCS unit within…

Power Systems

Solar Panel Clips Set for AntS antenna

Pumpkin, Inc.
  • ClassificationFlight Hardware | Flight Qualified | Space Proven
  • Set contentsSet of 4 clips
  • PCB size options0.031 in / 0.8 mm; 0.062 in / 1.6 mm

A flight-qualified set of 4 clips used to retain Pumpkin's solar panel on the ISIS AntS antenna module,…

Test Equipment & EGSE

Load Board

Pumpkin, Inc.
  • SKU711-00651
  • Category (site breadcrumb)CubeSat Kit Accessories
  • CAD/Datasheet file name (no link provided)Load Board A

A CubeSat Kit Accessories module (Load Board A) sold by Pumpkin for use during CubeSat integration and test.

OBC & Avionics

I/O LED Module

Pumpkin, Inc.
  • SKU710-00521
  • ClassificationDevelopment Hardware
  • I/O signals monitored48 (IO.[47..0])

A CubeSat Kit development module that visually displays the status of all 48 bus I/O lines on LEDs…

OBC & Avionics

Breakout Board Module

Pumpkin, Inc.
  • SKU711-00380
  • ClassificationDevelopment Hardware
  • Breakout signals48 I/O signals (IO.[47..0]), 8 USER[7..0] signals, MHX signals, -RESET

A CubeSat Kit development module that breaks out all bus I/O, USER and MHX signals to headers compatible…

OBC & Avionics

Protoboard Module Kit

Pumpkin, Inc.
  • SKU711-00303
  • ClassificationPrototyping Hardware
  • Prototyping grid0.100 in grid, approximately 500 plated through-holes

A CubeSat Kit prototyping module providing a red multilayer PCB with an 0.100 inch grid of plated through-holes…

OBC & Avionics

Motherboard Module (MBM)

Pumpkin, Inc.
  • Hardware classificationFlight Hardware | Flight Qualified | Space Proven
  • Module height0.600 in (15.24 mm)
  • Bus interfaceCubeSat Kit Bus standard, 104-pin connector

Pumpkin's flagship flight on-board computer carrier module: combined with a Pluggable Processor Module it forms a low-power 8-…

Structures & Mechanisms

CubeSat Kit™ Base Plate Assembly for AntS Antenna

Pumpkin, Inc.
  • Configuration option: Separation SwitchDual
  • MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
  • Mounting fasteners (to Chassis Walls)6x M3 flathead stainless-steel screws

A base-plate assembly variant configured to mount a third-party AntS deployable antenna system, with dual independent separation switches,…

Questions about how KOSMOLAB SPACE works? Guides & FAQ →