Arralis

Manufacturer Ireland Verified
24 Products
Visit website ↗
This profile was created from public sources. Is this your company? — update products, receive requests directly.

About Arralis

Arralis is an Irish company specialising in millimetre-wave (mmWave) and microwave integrated circuit (MMIC) technology for satellite communications, 5G telecommunications, automotive radar, and space applications. The company designs and manufactures GaAs and GaN MMICs operating in V-band, W-band, and other mmWave frequency ranges for space-grade satellite payloads, high-throughput satellite (HTS) systems, and terrestrial telecommunications infrastructure. Arralis products include power amplifiers, low-noise amplifiers, mixers, and integrated transceiver chipsets qualified and screened for space applications, serving European and international satellite manufacturers, space agencies, and defence customers.

Products

24

The HPA11201721B is a space-qualified 10 W GaN on SiC MMIC high power amplifier covering 17-20.5 GHz, with 20 dB large-signal gain, over 25% PAE, and an integrated output power detector, supplied as a bare die for hybrid circuit integration.

1 10

The HPA11201721QF is a space-qualified 10 W GaN on SiC MMIC high power amplifier in a 7x7 mm hermetically sealed surface-mount ceramic QFN package, covering 17-20.5 GHz with 20 dB gain and over 25% PAE.

1 9

The E-SP8T-7681 is a GaAs Schottky diode MMIC single-pole 8-throw RF switch covering 76-81 GHz with 4.5-5 dB insertion loss, 20-25 dB isolation, and 22 dBm power handling for automotive radar and mmWave imaging applications.

1 10

The FSN11200816QF is a low-phase-noise fixed-frequency microwave synthesizer covering a custom fixed frequency in the 8-16 GHz range, housed in a compact 25.4x25.4x6.35 mm surface-mount package with -103 dBc/Hz phase noise for SATCOM and radar LO applications.

1 4

The PAN-8498-64-K is a 64-element K-band passive flat panel antenna covering 17-21 GHz with over 20 dBi peak gain and selectable LHCP or RHCP circular polarization, designed for satellite communications and 5G ground terminals.

1 6

The SSPA11201721SS is a K-band GaN solid state power amplifier module delivering over 10 W saturated output power across 17-20.5 GHz from a single 25-28 V supply, with integrated power and temperature detection in a 63x60x25 mm package.

1 10

The KKa-LNA-1929 is a GaAs pHEMT 3-stage MMIC low noise amplifier covering both 17-21 GHz (K-band) and 27-31 GHz (Ka-band), providing 20 dB gain and 2.5 dB noise figure in a bare die format for satellite communications and space applications.

1 10

The KKa-TR-DL-1929 is a compact K/Ka-band SATCOM transceiver module with TX at 17-21 GHz and RX at 27-30 GHz, delivering 20 dBm linear output power, 2.5 dB noise figure, and sub-6 W total power consumption in a 96x91x33 mm form factor.

1 14

The TR1000 is a complete K/Ka-band RF satellite transceiver module enabling direct interface with a modem or SDR for high data-rate Ka-band payloads. It supports TX at 17-21 GHz and RX at 27-31 GHz with waveguide flanges for high-reliability antenna connections.

1 7

The UDC300 is a fully integrated standalone K/Ka-band uplink transceiver with up to 2.5 GHz instantaneous bandwidth, supporting ground segment and airborne applications with an on-board frequency synthesizer in a stackable enclosure.

1 8

The Ka-PS-2533 is a GaAs diode MMIC analog phase shifter covering 25.5-32.5 GHz with a full 360-degree phase variation, designed for phased array beam steering in Ka-band satellite communications and 5G antenna systems.

1 11

The PAN-5151-64-KA is a 64-element passive Ka-band flat panel array antenna covering 27-31 GHz with 20 dBi gain and selectable LHCP or RHCP circular polarization in a compact 6-layer PCB construction for satellite uplink ground terminals.

1 7

The TR400 is a fully integrated Ka-band satellite transceiver with two programmable local oscillators covering TX 17.3-20.7 GHz and RX 27.5-30.5 GHz with up to 250 MHz instantaneous bandwidth. It is designed for high-speed LEO satcom, IoT, and 5G applications.

1 9

The UDC400 is a compact standalone Ka-band transceiver module for LEO satellite communications, offering 250 MHz instantaneous bandwidth, +/-0.28 ppm TCXO frequency stability, and SMP/SMPM RF connectors in an aluminum enclosure for SDR/modem integration.

1 11

The LNA11202131SS is a multi-stage Ka-band low noise amplifier module covering 21-31 GHz with 34 dB gain and 2.5 dB noise figure, featuring enable/disable control and current and temperature monitoring in a fully enclosed housing with 2.92 mm RF connectors.

1 7

The TR500 is a dual-transceiver Ka-band transponder module for LEO satellite payloads, providing 27 dBm saturated output power, sub-2.5 dB noise figure, and up to 250 MHz instantaneous bandwidth with on-board TCXO frequency stability of +/-0.28 ppm.

1 11

The LEOLINK200 is a 1024-element Ka-band electronically steerable phased array antenna with +/-60 degree scan coverage, TX 27.5-31 GHz and RX 17.7-21.2 GHz, offering high sidelobe suppression for LEO satellite broadband connectivity on aviation, maritime, and mobile platforms.

1 7

The LEOLINK64 is a Ka-band 64-element electronically steerable phased array antenna with +/-60 degree beam steering in azimuth and elevation, covering TX 27.5-30 GHz and RX 17.7-20.2 GHz for LEO satellite, aviation, and mobile SATCOM applications.

1 11

The M-GNSSB-ANT-RX is a compact integrated multiband GNSS antenna and receiver module supporting GPS L1 and BeiDou B1 with 2-3 dB antenna gain, RTK capability, UART and RS-485 interfaces, designed for defense navigation, transportation, and precision positioning systems.

1 7

The M-GNSSB-RX is a compact multiband GNSS OEM receiver board supporting GPS L1 and BeiDou B1 with RTK correction capability, UART and RS-485 interfaces, and 3.3-5 V supply for defense, transportation, and precision navigation applications.

1 6

The FSN11201632QFP is a programmable low-phase-noise microwave frequency synthesizer covering 16-32 GHz with -95 dBc/Hz phase noise at 10 kHz offset, in a compact 25.4x25.4x6.35 mm surface-mount package for Ka-band satellite and radar LO applications.

1 4

The RADSP-22-A is a universal FMCW radar baseband processing board generating swept LO output at 20.9-23.9 GHz and supporting up to three receive channels, designed to simplify the development of millimeter-wave radar systems for space debris tracking, surveillance, and target detection.

1 7

The PAN-185185-4-S is a compact 4-element S-band passive flat panel antenna covering 1.95-2.25 GHz with over 10 dBi gain and selectable LHCP or RHCP circular polarization for satellite TT&C, telemetry, and mobile communications applications.

1 7

The X-TR-DL-78 is a compact X-band SATCOM transceiver covering TX 8-8.5 GHz and RX 7-7.5 GHz, delivering 1 W linear / 2 W saturated output power with a 1.8 dB noise figure, suitable for military satellite and space applications.

1 17

Reviews

No reviews yet — reviews come only from verified buyers after a completed request.

Write a review

0 / 2000
← All providers