HARDWARE / PRODUCT

ThinAir Plus

ThinKom Solutions, Inc.
ThinAir Plus

Hybrid multi-orbit IFC antenna system combining a ThinKom Ka2517 VICTS phased array with a LEO-only ESA for simultaneous GEO/MEO/LEO connectivity.

Technical specifications

Operating Band
Ka-band
Tx Frequency
27.5 to 30 GHz
Rx Frequency
17.3 to 20.2 GHz
Constellations
LEO/MEO/GEO
Azimuth Coverage
360° continuous
Elevation Coverage
+7.5° to +90° (network dependent)
Beam Agility
>250°/sec
Tracking Accuracy
<0.2°
Data Rates
Up to 1 Gbps down and 200 Mbps up (network dependent)
G/T
18.5 dB/K peak (13.5 dB/K at 20° elev.)
Network Efficiency
Up to 4 bits/Hz
Instantaneous Bandwidth
500 MHz
EIRP (Psat)
55.5 dBW (51 dBW at 20° elev., 80 W Psat SSPB)
Azimuth Beamwidth
1.8° Tx and 1.7° Rx
Polarization
Switchable circular (co/orthogonal), simultaneous dual-pol mode
Axial Ratio
<1.5 dB typical
OAE Dimensions (L x W x H, excl. ESA)
121 in x 48 in x 7.9 in (3.07 m x 1.2 m x 0.2 m)
Antenna Weight
104 lb (47 kg)
Avg. System Power
450 W
Operating Temperature
-55°C to +74°C external
Environmental Compatibility
RTCA/DO-160G

About

ThinAir Plus merges a ThinKom Ka2517 phased array with a LEO-only electronically steered array (ESA) in a single installation for resiliency, flexibility and efficiency. The Ka2517 VICTS component provides Ka GEO, MEO and LEO operation as the primary data pipe, while the LEO-only ESA supports current and emergent LEO networks with low-latency connectivity, minimizing dark tails and optimizing the passenger experience.

Documentation

Need the full ICD, test reports or a specific revision? Ask the supplier directly.

Source: www.thinkom.com ↗